The Aurora Audio GT10x8 Absolute is an 10 input, 8 output Router that enables the engineer to route line level signal where they need to for their session. Each channel on the GT10x8 Absolute has it’s own input and output level control and pan, so you can determine the level and position in the stereo field (when you choose to use a send in stereo). Also...
Henry Engineering StereoSwitch II is a three-input stereo audio switcher. It accepts up to three stereo balanced audio sources, selecting one to be routed to the stereo balanced output. It is ideally suited for numerous broadcast applications, e.g., as a studio switcher, line selector, or for automatic source selection under the control of a broadcast...
Henry Engineering AES DigiSwitch 3X1 is a three-input switcher for AES digital audio signals. It accepts up to three AES audio sources, selecting one that is sent to the AES output. It is ideally suited for numerous broadcast and professional audio applications, e.g., as a studio switcher, AES source selector, or for automatic source selection under the...
Henry Engineering AutoSwitch is a multi-purpose stereo audio switcher and silence sensor. It can be used to manually or automatically select between two stereo audio sources. AutoSwitch can be used as a monitor-source switcher. When interfaced to a console’s mic-tally logic it will sense when the control room mic is on, and switch from “off-air” audio to...
By using our website, you accept the use of cookies to offer you content and services tailored to your interests.